VICTRON ENERGY PHOENIX INVERTER 12/250 230V

- High peak power handling: The peak power of 400W is useful for powering loads with a high initial start-up power.

- Superior build quality: The unit features a toroidal transformer which works at higher efficiency and with a cooler operating temperature compared to standard transformers.

- Inbuilt safety protection: Equipped with important safety features, such as protection against short-circuit, overload, battery overvoltage and overheating.

- Advanced monitoring and programming abilities: The VE.direct port of the inverter enables connection to a PC/Laptop to access the free VictronConnect software (requires VE.Direct to USB cable sold separately). Alternatively, an additional VE.Direct Bluetooth dongle (sold separately) may be connected in order to wirelessly connect a smartphone/tablet to the inverter via the VictronConnect app. Using either of these connection methods will unlock the ability to monitor the system from a remote location and view important system data such as Voltage (battery and AC output), a load indicator and alarms. The user will also gain exclusive access to a range of options for remote programming of the system - for example, specifying the low-battery cut-off level (and level for reconnection), the output voltage and frequency (50/60Hz), settings for the power-saving ECO mode. There is also the option to program the inverter so that the ignition control of your vehicle is used for switching the unit On/Off.

- Power-saving ECO mode: Switches the inverter into standby when the load power falls below a pre-set value. It will switch on every 2.5 seconds (adjustable) to check whether load power has returned to a sufficient level.

- Dynamic cut-off feature: Intelligently determines the DC disconnect voltage, by monitoring the rate of discharge from the battery (connection to VictronConnect app/software required).

- Remote On/Off Power function: Features a connection point for an optional remote on/off switch (not included).

- AC Power transfer: The inverter can be connected to an optional automatic transfer switch (not included) to transfer the load to another AC power source.

- LED Indicators: Red / green LEDs show inverter operation and status of various protection features.



The inverter is fitted with a UK 3-pin plug socket.

Input DC voltage range: 9.2V - 17V
Output AC voltage range: 230V
Output AC frequency: 50Hz / 60Hz (programmable with app)
Continuous power at 25°C: 250VA / 200W
Continuous power at 40°C: 175W
Peak power: 400W
Zero-load power: 4.2W
Default zero-load power in ECO mode: 0.8W (Default retry interval = 2.5s, adjustable)
Output wave: pure sine wave
Battery type: Sealed lead acid, Gel, AGM
AC socket: UK (BS 1363)
Minimum battery capacity: 30Ah
Nominal inverter efficiency: 87%
Low battery shutdown: 9.3V (programmable with app)
Operating temperature range: -60°C to +60°C (fan assisted cooling)
Maximum cable cross section: 10mm²
Humidity (non-condensing): max. 95%

Size: 26 x 16.5 x 8.6 cm
Weight: 2.4 kg

This product is covered by a 5 year manufacturer warranty.